Pfaff creative 2124 Owner's Manual - Page 48
Start/stop: reverse button, Design width, Design length, Thread tension
View all Pfaff creative 2124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Start/stop: reverse button In the embroidery mode the reverse sewing button (108)is a start/stop button. Use the button when you want to start your embroidery and when you want to stop. Keep the button depressed in order to start the embroidery. Note: You can also use the foot control when embroidering. Design width The width of a design will be shown in the window in mm (A). You can change the design width by pressing the + and - buttons (86). The design can be scaled between 75% to 125%. Design length The length of a design will be shown in the window in mm (B). You can change the design length by pressing the + and - buttons (87). The design can be scaled between 75% to 125%. Thread tension When loading a design the thread tension will be set to a predefined value (C). If you want to change the thread tension use the + and - buttons (88) to increase or decrease the tension. 3:12