Pfaff creative 7510 Owner's Manual - Page 121
Pfaff creative 7510 Manual
View all Pfaff creative 7510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
And here is how it is done: • Remove the sewing foot • Place the eyelet plate onto the needle plate making sure that pin A fits into the middle cutout of the needle plate. Then push the eyelet plate down at the front • Place the marked fabric taut in an embroidery hoop. • Cut one or two fabric threads and push the fabric over the pin in the eyelet plate. The fabric must fit tightly around the pin. • Place the presser foot lifter in darning position. • Pull up the bobbin thread and hold it tor the first few stitches. • Stitch around the cut with your chosen program. While doing so, turn the hoop slowly and. The stitches must be very close to each other. • Then secure with a few straight stitches. TIP: Select another program such as 37 or 44. In this way the cut in the fabric will not be stitched around or only partly stitched around. To complete this, select program 27 and stitch around the cut uniformly. Thus you create beautiful petal forms. 117