Pfaff creative 7510 Owner's Manual - Page 42

PFAFF creative 7510 Made in Germany I •$•b I LU I I F Description of the sewing function keys P Reverse key (27) When the reverse key is pressed, the green diode lights up and the machine sews backwards. By pressing this key again, the machine sews for wards. To tie off, hold this key pressed a little while. In addition, you can use this key to define the bartack for a buttonhole or the length of a darning program. Bobbin thread monitor (1) The red diode blinks when the bobbin thread is nearing its end. Now key (2) must be pressed to disengage the twin needle function and then another pattern can be selected. Slow sewing (3) By pressing this key, the sewing speed of the machine is reduced. -[ Needle stop (4) With this key you can determine whether the needle should stop in the fabric (down position) or at its highest point (up position) when releasing the foot control. I F fl Twin needle (2) Press this key when sewing with the twin needles. The stitch width will automatically be decreased by 2 mm to avoid the needle hitting the sewing foot If the twin needle key is pressed in combination with the program 00, it is not possible to change the needle position. If another pattern is subsequently selected, the message appears in the display: Twin needle Round hole needle plate? Tacking key (5) By pressing this key, the beginning and end of your seam will be automatically tied-off. IL I IF IF 38 F