Philips DV910VHS98 User manual - Page 43

DV910(H9100).QX33 01.8.9 10:26 AM Page 43 Time Search 43 VCR Follow the steps below to program the DVD/VCR to search forward or backward on a tape a specific length of time.There must be a tape in the DVD/VCR. q Before you begin, place the DVD/VCR in VCR mode. Press the OUTPUT SELECT button so that the green VCR OUTPUT light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR. 1 Press the VCR button, then press the SEARCH MODE/TIME SEARCH button. TIME SEARCH 0:00 3 ENTER SEARCH TIME 2 Within 10 seconds, use the Number buttons to enter the desired length of time you want to skip forward or backward. For example, for 1 hour, 25 minutes, press Number buttons 1, 2, 5. Or, for five minutes, press Number buttons 0, 0, 5. 3 Within 10 seconds, press the Fast Forward g button or the Rewind h button. The DVD/VCR will skip over the specified length of time, then begin playback. 2 MARKER POWER SETUP AUDIO SUBTITLE ANGLE MENU TITLE MODE OK RETURN DVD OUTPUT SELECT VCR SKIP/CHANNEL H/L CHANNEL/SKIP K/G B E D C REC /OTR F A-B CLEAR REPEAT DISPLAY 1 23 STATUS/EXIT SEARCH MODE 4 56 TIME SEARCH SLOW 7 89 ZOOM +10 0 TIMER SET VCR/TV MEMORY SPEED 1 Helpful Hints • If you want to search for more than 59 minutes, you must enter the length of time in hours and minutes. For example, to search forward 70 minutes, press 1,1,0 at step 2. • You can not do a Time Search while recording. • To remove the Time Search display, press the SEARCH MODE/TIME SEARCH button again. • To cancel a Time Search that is in progress, press the Stop C button. • If the end of the tape is reached during a Time Search, the Time Search will be cancelled.The DVD/VCR may rewind the tape. Details are on page 45.