Philips DVD962SA99 User manual - Page 11

Hookups (cont'd) 11 Connecting to a TV Only TV has an S-Video In Jack MAINS 2 Back of TV (example only) RIGHT AUDIO IN LEFT AUDIO IN S-AUDIO IN 3 RIGHT AUDIO IN LEFT AUDIO IN S-VIDEO IN 1 DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital/DTS COAXIAL OPTICAL SURROUND CENTER FRONT L 1 L R SURROUND SUB WF FRONT MULTICHANNEL AUDIO OUT R 2 AUDIO CVBS OUT Pr/Cr Pb/Cb Y VIDEO OUT S-VIDEO PROGRESSIVE SCAN OUT Pr/Cr Pb/Cb Y 1 Connect the S-VIDEO (VIDEO OUT) jack of the DVD Player to the S-VIDEO IN jack on the TV. Use an S-Video cable (not supplied). 2 Connect the supplied red and white audio cables to the red and white Left and Right AUDIO OUT jacks on the DVD Player. Connect the other end of the cables to the left/right AUDIO IN jacks on the TV. Match the cable colors to the jack colors. 3 Connect the DVD Player's power cord to the MAINS jack on the rear of the DVD Player. Connect the power cords of the DVD Player and the TV to the power outlet. Turn on the power of the TV and the DVD Player. 4 Set the TV to the correct S-Video In channel. This channel might be near channel 00. See your TV owner's manual for details. Or, continue to change channels at the TV until you see the DVD Player's screen saver on the TV screen.