Philips DVD962SA99 User manual - Page 13
Connecting to a TV and a Stereo Receiver, Stereo has Dolby Surround or, Stereo has 2-channel analog
View all Philips DVD962SA99 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Hookups (cont'd) 13 Connecting to a TV and a Stereo Receiver Stereo has Dolby Surround or Stereo has 2-channel analog (right and left Audio In jacks) Stereo (example only) Back of TV 2 (example only) CVBS MAINS 3 LEFT AUDIO IN RIGHT AUDIO IN VIDEO IN 1 DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital/DTS COAXIAL OPTICAL SURROUND CENTER FRONT L 1 L R SURROUND SUB WF FRONT MULTICHANNEL AUDIO OUT R 2 AUDIO CVBS Pr/Cr Pb/Cb Y OUT VIDEO OUT S-VIDEO PROGRESSIVE SCAN OUT Pr/Cr Pb/Cb Y 1 Connect one of the yellow CVBS VIDEO OUT jacks of the DVD Player to the corresponding VIDEO IN jack on your TV. Or, use the S-VIDEO or Pr/Cr Pb/Cb Y VIDEO OUT jacks. Details are on pages 10 and 11. You only need one video connection. 2 Connect the supplied red and white audio cables to the red and white Left and Right AUDIO OUT jacks on the DVD Player. Connect the other end of the cables to the left/right AUDIO IN jacks on the Stereo Receiver. Match the cable colors to the jack colors. 3 Connect the DVD Player's power cord to the MAINS jack on the rear of the DVD Player. Connect the power cords of the DVD Player and the TV to the power outlet. Turn on the power of the TV and the DVD Player. 4 Set the TV to the correct Video In channel. This channel may be near channel 00. See your TV owner's manual for details. Or, continue to change channels at the TV until you see the DVD Player's screen saver on the TV screen. 5 Set your Stereo Receiver to the correct Audio In channel or sound source. Refer to the owner's manual of the Stereo Receiver.