Philips HTS3565D User manual - Page 24

English Getting Started (continued) Setting the speakers' channels You can adjust the delay times (center and surround only) and volume level for individual speakers. These adjustments let you optimize the sound according to your surroundings and setup. Before you start... Stop the disc playback by pressing Ç twice or remove the disc from the disc tray. Otherwise, the settings are not accessible. A In disc mode, press OPTIONS on the remote control. B Press repeatedly to select { Audio Setup } icon, then press . C Select { Speakers Volume } and press . Audio Setup Speakers Volume Speakers Delay HDMI Audio CD Upsampling Speakers Level Setup Front Left 0dB Audio Sync Front Right 0dB Center 0dB Subwoofer 0dB Rear Left 0dB Rear Right 0dB Press OPTIONS to exit menu E Use keys to highlight { Speakers Delay } and press . Audio Setup Speakers Volume Speakers Delay HDMI Audio CD Upsampling Audio Sync Speakers Distance Setup Center 0ms Rear Left 0ms Rear Right 0ms Press OPTIONS to exit menu F Use keys to set the delay times (0 ms ~ 15 ms) for centre and rear speakers that best suit your surround sound needs. G Press OK to confirm. Helpful Hints: - A 1ms increase/decrease of delay time is equivalent to 30 cm change in distance. - Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers. - The test tone will be generated to help you judge the sound level of each speaker. D Use keys to set the volume level for each speaker (-6dB ~ +6dB) and press OK to confirm. 24 1_hts3565-66D_37_eng2_final813.i24 24 2008-03-27 3:12:01 PM