Pioneer AVICN5 Owner's Manual - Page 105

Using the AV Source (Pioneer AV Equipment) Chapter 08 Using the AV Source (Pioneer AV Equipment) = Refer to Switching the XM channel select mode on this page. 6 XM channel category or XM channel information 7 Detailed information or preset list display 8 Category icon 1 Touch [XM] in AV Source screen to select the XM. = For details, refer to Selecting an AV source on page 39. 2 Touch [Band] to select an XM band. Touch [Band] repeatedly until the desired XM band is displayed: XM1, XM2 or XM3. 3 To perform tuning, touch or . The channels move up or down step by step. If you keep touching or , you can in- crease or decrease channel number continu- ously. You can also perform manual tuning by pressing the o or p button. p You can also perform tuning within selected channel category. = For details concerning operations, refer to Selecting a channel in the channel category on the next page. Switching between the detailed information display and the preset list display You can switch the left side of the basic screen according to your preference. % Touch [Preset] (or [Detail]). Each touch of [Detail] (or [Preset]) changes the detail information display or preset list display. Detail information display (e.g. All CH Mode) Preset list display (e.g. All CH Mode) Switching the XM channel select mode You can switch modes between the two methods for selecting and listing channels. All CH Mode (or CH Number Mode): You can select a channel from all channels. Category Mode: You can select a channel within the selected category. % Touch [Mode] to select the desired channel select mode. Touch [Mode] repeatedly to switch between the two modes. Switching the XM display % Touch [Disp]. Each touch of [Disp] changes the information as follows: GEX-P900XM: Channel number - Channel name - Artist name/feature - Song/program title - Information GEX-P910XM: Channel name - Artist name/future - Song/ program title - Channel category En 105