Pioneer AVICN5 Owner's Manual - Page 132
Customizing the AV Source Setting - speakers
UPC - 012562890166
View all Pioneer AVICN5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Chapter 09 Customizing the AV Source Setting 2 Touch a or b to adjust front/rear speaker balance. Each time you touch a or b moves the front/ rear speaker balance towards the front or the rear. Front:15 to Rear:15 is displayed as the front/ rear speaker balance moves from front to rear. Both Front:0 and Rear:0 are the proper setting when only two speakers are used. When the rear output setting is Rear SP Sub. W, you cannot adjust front/rear speaker balance. = Refer to Setting the rear output and subwoofer controller on page 137. 3 Touch c or d to adjust left/right speaker balance. Each time you touch c or d moves the left/ right speaker balance towards the left or the right. Left:9 to Right:9 is displayed as the left/right speaker balance moves from left to right. Adjusting equalizer curves You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in Custom1. p If you make Custom2 adjustments, Custom2 curve is updated. p You can adjust the center frequency, level and the Q factor (curve characteristics) of each currently selected curve band (Low/ Mid/High). ! Level: You can select the decibel (dB) level of the selected EQ. ! Q: You can select the details of the curve characteristics. 1 Touch [EQ Menu] in Sound menu. 2 Touch [Customize]. 3 Touch c or d to select the equalizer band to adjust. Each time you touch c or d selects equalizer bands in the following order: Low - Mid - High 4 Touch c or d to select the desired frequency. Touch c or d until the desired frequency appears in the display. Low: 40 - 80 - 100 - 160 (Hz) Mid: 200 - 500 - 1K - 2K (Hz) High: 3.15K - 8K - 10K - 12.5K (Hz) 5 Touch c or d to adjust the level of the equalizer band. Each time you touch c or d increases or decreases the level of the equalization band. +12 to -12 is displayed as the level is increased or decreased. 6 Touch c or d to select the desired Q factor. Touch c or d until the desired Q factor appears in the display. Wide2 - Wide1 - Narrow1 - Narrow2 p If you make adjustments, Custom1 curve is updated. ! Band: You can select the equalizer band. ! Frequency: You can select which frequency to be set as the center frequency. Setting the simulated sound stage You can select the desired effect from various simulated sound stage, such as Music Studio or Dynamic Theater. You can also adjust a listener positioning effect. 132 En