Pioneer AVICN5 Owner's Manual - Page 158

Appendix Appendix 2 Press MENU button to change to AV Source screen. 3 Press and hold MENU button for two seconds or more. The 4-point touch panel adjustment screen appears. 4 Touch and hold the arrows that point to the corners of the LCD screen with the stylus. The red arrow indicates the order. Memory Navi Mode While the DVD Map Disc is inserted, you can store the data on the DVD Map Disc into the memory of the navigation system. If the DVD Map Disc is removed from the navigation system after the data is stored, navigation is performed using the data in the memory (memory navi mode). In the memory navi mode, you can play a music CD or DVD-Video on the navigation system while navigation is taking place. The operation is automatically switched to the memory navi mode when the DVD Map Disc is removed from the navigation system. 5 Press MENU button. The adjusted position data is saved. p Do not turn off the engine while saving the adjusted position data. p Press MENU button to complete the 4-point adjustment. p To cancel the adjustment, press and hold MENU button. 6 Press MENU button. The 16-point touch panel adjustment screen appears. 7 Gently touch the center of + mark displayed on the screen with the touch panel adjustment pen. After you touch all marks, the adjusted position data is saved. p Do not turn off the engine while saving the adjusted position data. p Press MENU button to return to the previous adjustment position. 8 Press and hold MENU button. The adjustment is complete. p If touch panel adjustment cannot be performed properly, consult your local Pioneer dealer. Navigation in the memory navi mode During the memory navi mode, navigation is performed only using the data read into the memory. Therefore, some functions are restricted compared with navigation using the DVD Map Disc (DVD navi mode). These function buttons, which cannot be used in the memory navi mode, are indicated in light gray. (If you want to use these functions, please insert the DVD Map Disc again.) In addition, you may need to insert the DVD Map Disc and store new data in the memory during navigation operation, such as when the destination is far away. The memory navi mode uses the following map data to perform navigation. The following are collectively known as Memory Data: ! Manually downloaded memory area data in [Map in Memory] of the Settings menu (Manual downloaded Memory Area) ! Automatically downloaded memory data of the surrounding areas during the route search (Auto downloaded Memory Area) = For details concerning operations, refer to Defined Locations on page 83. 158 En