Pioneer AVICN5 Owner's Manual - Page 32

Chapter 02 Basic Operation - When the ignition switch is turned ON again (or turned to ACC), the LCD panel will open automatically. - Removing or attaching the front panel will automatically close or open the LCD panel. = For details concerning operations, refer to Removing the front panel on the next page. p When the ignition switch is turned OFF after the LCD panel has been closed, turning the ignition switch ON again (or turning it to ACC) will not open the LCD panel. In this case, press OPEN/CLOSE button to open the LCD panel. p When closing the LCD panel, check to make sure that it has closed completely. If the LCD panel has stopped halfway, leaving it like this could result in damage. % Press OPEN/CLOSE button to close the LCD panel. p To open the LCD panel, press OPEN/CLOSE button again. 3 Touch [ESC]. When Flap Setup screen is displayed during the navigation screen, the map screen is displayed. When Flap Setup screen is displayed during the AV screen, the current AV operation screen is displayed. p If you can hear the LCD panel knocking against your vehicle's console or dashboard, press o button to move the LCD panel slightly forward. p When adjusting the LCD panel angle, be sure to press o or p button. Manually adjusting the LCD panel by hand may damage it. Setting the LCD panel Adjusting the LCD panel angle 1 Press and hold OPEN/CLOSE button. Flap Setup screen appears. p The adjusted the LCD panel angle will be memorized and LCD panel will automatically return to this angle the next time the LCD panel is opened. 2 Press o or p button to adjust the LCD panel to an easily viewable angle. The LCD panel angle continues changing as long as you keep pressing and holding o or p button. Setting the slide back function You can adjust the LCD panel slide position to prevent the display from hitting the shift lever of an automatic vehicle when it is in P (park) position. p Please be careful, as LCD panel will slide immediately after the setting is turned [On]. 32 En