Pioneer AVICN5 Owner's Manual - Page 110

Chapter 08 Using the AV Source (Pioneer AV Equipment) Switching the SIRIUS channel select mode You can switch modes between the two methods for selecting and listing channels. All CH Mode: You can select a channel from all channels. Category Mode: You can select a channel within selected category. % Touch [Mode] to select the desired channel select mode. Touch [Mode] repeatedly to switch between the two modes. Switching between the detailed information display and the preset list display You can switch the left side of the basic screen according to your preference. % Touch [Detail] (or [Preset]). Each touch of [Detail] (or [Preset]) changes the detail information display or preset list display. Detail information display (e.g. All CH Mode) Preset list display (e.g. All CH Mode) SIRIUS channel information Storing and recalling broadcast stations If you touch any of the preset tuning keys Preset1 - Preset6 to easily store up to six broadcast stations for later recall with the touch of a key. 1 Select the channel that you want to store in memory. 2 Touch [Preset] to display the preset list. 3 Keep touching a preset tuning key Preset1 - Preset6 until the SIRIUS preset number (e.g., P.CH 1) stops flashing. The number you have touched will flash in the SIRIUS preset number indicator and then re- main lit. The selected station has been stored in memory. The next time you touch the same preset tun- ing key Preset1 - Preset6 the station is re- called from memory. p Up to 18 stations, 6 for each of three SIRIUS bands can be stored in memory. p You can also touch or to recall stations assigned to preset tuning keys Preset1 - Preset6 in the detailed informa- tion display when the "All CH Mode" is se- lected. Selecting a channel in the channel category 1 Touch [Mode] to select Category Mode. 110 En