Pioneer AVICN5 Owner's Manual - Page 77
Checking the Navigation, Status, Editing the Navigation Utilities
UPC - 012562890166
View all Pioneer AVICN5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Editing the Navigation Utilities Chapter 05 Editing the Navigation Utilities Until the sensor's initial learning is complete, only the voltage and clock are displayed. 1 Switch to Vehicle Dynamics Display. = For details concerning operations, refer to Switching the current position screen display mode on page 44. 2 Touch the left or right instrument. Touch panel keys are displayed. 3 Touch the items you want to display. terns from among those displayed onscreen to change the panel to the selected pattern. p If you touch [Peak Hold Reset], the maximum and minimum (green line) values indicated in [Acceleration] and [Side Acceleration] are reset. p You cannot change the speedometer at the center. p Selecting Demo Mode in Settings menu enables you to perform a demonstration with random values. You can select the following items: Voltage: Displays the power supply and voltage supplied from the battery to this system. Acceleration: Displays acceleration in a forward direction. + sign indicates acceleration while - sign indicates deceleration. Side Acceleration: Displays acceleration in a side direction, such as when turning. + sign indicates a right turn, while - sign indicates a left turn. Angular Velocity: Displays the vehicle's turning angle over one second (how far it has turned in a second). Slope: Displays the vehicle's vertical movement. + side represents the rising angle, and - side the falling angle. Direction: Displays the direction your vehicle is traveling in. Clock: Displays the current time. Adjust Look: Touch [Adjust Look] to display a screen for selecting the panel pattern. Touch one of the pat- Checking the Navigation Status The navigation status, including the driving status of a vehicle, positioning status by satellite, learning status of the 3D sensor and cable connection status, can be checked. Checking sensor learning status and driving status 1 Touch [Settings] in NAVI MENU, then touch [Hardware Info]. 2 Touch [3D Calibration]. The 3D Calibration Status screen appears. 1 2 3 4 6 75 1 Distance Driving distance is indicated. 2 Speed Pulse Total number of speed pulses is indicated. 3 Learning Status Current driving mode is indicated. En 77