Ricoh 8100DN Hardware Guide - Page 112
Printer Does Not Print
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Printer Does Not Print Printer Does Not Print Possible Cause Solutions Is the power on? Confirm that the cable is securely plugged into the power outlet and the printer. Turn on the power. Does the Online indicator If not, press the {Online} key to light it. stay on? Does the Alert indicator stay red? If so, check the error message on the display and take the required action. Is paper loaded? Load paper into the paper tray or onto the bypass tray. See p.71 "Loading Paper". Can you print a configura- If you cannot print a configuration page, it probably indicates a tion page? printer malfunction. Contact your sales or service representative. See "Printing the Test Page", Quick Installation Guide. Is the interface cable con- Connect the interface cable securely. If it has a fastener, fasten it nected securely to the securely as well. printer and the computer? Are you using the correct interface cable? The type of interface cable you should use depends on the computer you use. Be sure to use the correct one. If the cable is damaged or worn, replace it with a new one. See p.134 "Specifications". Is the Data In indicator If not blinking or lit, the data is not being sent to the printer. blinking or lit after starting the print job? ❖ If the printer is connected to the computer using the in- 8 terface cable Check the port connection setting is correct. For details about checking the port connection, see p.102 "Checking the port connection". ❖ Network Connection Contact your network administrator. How is the signal strength ❖ Ad hoc Mode or 802.11 Ad hoc Mode when using the wireless Either move to a location where the signal is good, or remove LAN? obstructions. ❖ Infrastructure Mode Check the signal status from the "Maintenance" menu on the control panel. If the signal is poor, either move to a location where it is good, or remove obstructions. If printing still does not start, contact your sales or service representative. Consult with the store where the printer was purchased for information about the location of sales or service representatives. 101