Ricoh 8100DN Hardware Guide - Page 117
Toner saving, Print Quality, Dithering, Gray reproduction Text/Line Art, Status, Possible Causes
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Troubleshooting Status Possible Causes, Descriptions, and Solutions Images are cut off, or excess pages are printed. If you are using paper smaller than the paper size selected in the application, use the same size paper as that selected in the application. If you cannot load paper of the correct size, use the reduction function to reduce the image, and then print. See the printer driver Help. The image of the printout is dif- When [Toner saving] is checked under the [Print Quality] tab in ferent from the image on the the printer driver's dialog box, the monochrome gradation computer's display. may appear differently. See the printer driver Help. Photo images are coarse. Some applications lower the resolution for making prints. Fine dot pattern does not print. Change the [Dithering:] setting in the printer driver's dialog box. See the printer driver Help. Black gradation is not natural. Select [Gray reproduction (Text/Line Art):] in the printer driver's dialog box. See the printer driver Help. Solid lines are printed as broken Change the [Dithering:] setting in the printer driver's dialog lines. box. See the printer driver Help. The print out image is missing • Paper is damp. Use paper that has been stored properly. or partially blurred. See p.63 "Paper and Other Media". • Toner is almost depleted. When the "Add Toner" mes- sage appears on the display panel, replace the toner car- tridge. 8 See p.87 "Replacing the Toner Cartridge". • Condensation may have collected. If rapid change in tem- perature or humidity occurs, use this printer only after it has acclimatized. The whole printout is blurred. • Paper is damp. Use paper that has been stored properly. See p.63 "Paper and Other Media". • If you select [Toner saving] on the [Print Quality] tab in the printer properties dialog box, printing is generally less dense. See the printer driver Help. • Toner is almost depleted. When the "Toner depleted / Add Toner" message appears on the display panel, replace the toner cartridge. See p.87 "Replacing the Toner Cartridge". • Condensation may have collected. If rapid change in temperature or humidity occurs, use this printer only after it has acclimatized. White streaks appear. • Toner is almost depleted. When the "Toner depleted /Add Toner" message appears on the display panel, replace the toner cartridge. See p.87 "Replacing the Toner Cartridge". 106