Ricoh 8100DN Hardware Guide - Page 57
from this core making a loop as shown., Connect the other end of the cable to the printer's network
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Connecting the Printer Using the Gigabit Ethernet cable A For using the gigabit ethernet cable, attach one ferrite core at the printer end of the Ethernet cable, and attach the other ferrite core about 10 cm (4 inches) ( ) from this core making a loop as shown. 3 AQV564S B Connect the ethernet cable to the gigabit ethernet board. AQV551S C Connect the other end of the cable to the printer's network, such as a hub. Note ❒ The printer's ethernet and USB ports are not available when the gigabit ethernet board is attached to the printer. Reference For details about network environment settings, see Software Guide. For details about attaching the gigabit ethernet board, see p.38 "Attaching Gigabit Ethernet Board". 46
Connecting the Printer
46
3
Using the Gigabit Ethernet cable
A
For using the gigabit ethernet cable, attach one ferrite core at the printer
end of the Ethernet cable, and attach the other ferrite core about 10 cm (4
inches) (
) from this core making a loop as shown.
B
Connect the ethernet cable to the gigabit ethernet board.
C
Connect the other end of the cable to the printer's network, such as a hub.
Note
❒
The printer's ethernet and USB ports are not available when the gigabit
ethernet board is attached to the printer.
Reference
For details about network environment settings, see Software Guide.
For details about attaching the gigabit ethernet board, see p.38 “Attaching
Gigabit Ethernet Board”.
AQV564S
AQV551S