Ricoh 8100DN Hardware Guide - Page 63
Host Interface, Enter, Network Setup, Active Protocol, Active, Not Active, Press the, Select, using
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Configuration A Press the {Menu} key. AQV251S B Select [Host Interface] using {T} or {U}, and then press the {q Enter} key. 4 C Select [Network Setup] using {T} or {U}, and then press the {q Enter} key. D Select [Active Protocol] using {T} or {U}, and then press the {q Enter} key. E Select the network protocol using {T} or {U}, and then press the {q Enter} key. F Select [Active] or [Not Active] using {T} or {U}, and then press the {q Enter} key. Set other protocols you need to set in the same way. • Select [Not Active] for unused protocols. 52 • Enable IPv4 to use the Pure IPv4 environment of NetWare 5/5.1, NetWare 6/6.5.
Configuration
52
4
A
Press the
{
Menu
}
key.
B
Select
[
Host Interface
]
using
{T}
or
{U}
, and then press the
{
q
Enter
}
key.
C
Select
[
Network Setup
]
using
{T}
or
{U}
, and then press the
{
q
Enter
}
key.
D
Select
[
Active Protocol
]
using
{T}
or
{U}
, and then press the
{
q
Enter
}
key.
E
Select the network protocol using
{T}
or
{U}
, and then press the
{
q
Enter
}
key.
F
Select
[
Active
]
or
[
Not Active
]
using
{T}
or
{U}
, and then press the
{
q
Enter
}
key.
Set other protocols you need to set in the same way.
• Select
[
Not Active
]
for unused protocols.
•
Enable IPv4 to use the Pure IPv4 environment of NetWare 5/5.1, NetWare 6/6.5.
AQV251S