Ricoh 8100DN Hardware Guide - Page 42
Reference, cannot install it properly even after reinstallation, contact your sales or
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Attaching Memory Unit Type D 128MB, Memory Unit Type E 256MB (SDRAM Module) Note ❒ Be sure to return the provided screwdriver to its original position on the inside of the front cover. ❒ After finishing the installation, you can check the memory unit is properly installed: Print the configuration page from the [List/Test Print] menu. If it is installed properly, the memory capacity will appear under "Total Memo- ry" on the configuration page. ❒ The table below shows the total SDRAM module capacities. 2 Standard 128 MB 128 MB 256 MB 256 MB Extended 128 MB 256 MB 128 MB 256 MB 256 MB 384 MB 384 MB 512 MB Total ❒ If the memory unit is not properly installed, repeat this procedure. If you cannot install it properly even after reinstallation, contact your sales or service representative. ❒ Install the controller board carefully to prevent any malfunction. Reference For printing the configuration page, see "Printing the Test Page", Quick Installation Guide. 31