Ricoh 8100DN Hardware Guide - Page 37
Fasten all the screws which you removed in step
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Installing Options P Store the controller board (1) into the printer while gently pressing the cover (2). 2 AQV502S Push in the controller board firmly to align the rails in the printer's compartment. Q Fasten all the screws which you removed in step D. AQV503S The printer may malfunction if the controller board is not properly installed. R When the power is turned on, the hard disk drive will be formatted auto- matically. Note ❒ Be sure to return the screwdriver to the paper tray after using it. ❒ After finishing installation, you can check whether the hard disk drive is properly installed: Print the configuration page from the [List/Test Print] menu. If it is installed properly, "Printer Hard Disk Drive" will appear for "Device Connection" on the configuration page. ❒ If the hard disk drive is not installed properly, reinstall it following this procedure. If you cannot install it properly even after attempting reinstallation, contact your sales or service representative. ❒ Install the controller board carefully to prevent any malfunction. Reference For printing the configuration page, see "Printing the Test Page", Quick Installation Guide. 26