Ricoh 8100DN Hardware Guide - Page 70
Enter, Trans. Speed, Infrastructure, 11 Ad hoc, Comm. Mode, IEEE 802.11b, Enter ID
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
IEEE 802.11b (Wireless LAN) Configuration H Enter the channel using {T} or {U}, and then press the {q Enter} key. I Set [Trans. Speed] in the same way. The factory default is [Auto]. If you need to change the transmitting speed depending on environment you are using, select the appropriate transmitting speed. J Print a configuration page to confirm the settings made. Reference 4 For details about printing the configuration page, see "Printing the Test Page", Quick Installation Guide. Setting SSID If [Infrastructure] or [802.11 Ad hoc] is selected for [Comm. Mode], set SSID to use for transmission. Confirm the network administrator for SSID to use. A In the [IEEE 802.11b] menu, select [SSID] using {T} or {U}, and then press the {q Enter} key. If an SSID has been set, you can check the SSID setting. B select [Enter ID] using {T} or {U}, and then press the {q Enter} key. C Enter characters using {T} or {U}, and then press the {q Enter} key. The number of character you have entered is displayed on the top right of the screen. The characters that can be used are ASCII 0x20-0x7e (32 bytes), 16 digits. 59