Ricoh 8100DN Hardware Guide - Page 93
Specifying Custom Size Paper for the Bypass Tray, Paper Input, Enter, Bypass Size, Custom Size
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Paper and Other Media Specifying Custom Size Paper for the Bypass Tray Important ❒ When loading custom size or special paper, specify the paper size using the control panel and printer driver. ❒ Paper sizes between 148 - 600 mm (5.83-23.62 in.) in length and 100 - 297 mm (3.94-11.70 in.) in width can be loaded in the bypass tray. However, the size range varies depending on a type of printer drivers. For details, see the printer driver Help. ❒ Be sure to set a same size using the control panel and the printer driver. If you set different size, printer error will occur. ❒ You cannot print on custom size paper with an application that does not support the custom size setting. A Press the {Menu} key. 5 AQV251S B Select [Paper Input] using {T} or {U}, and then press the {q Enter} key. C Select [Bypass Size] using {T} or {U}, and then press the {q Enter} key. D Select [Custom Size] using {T} or {U}, and then press the {q Enter} key. 82