Ricoh 8100DN Hardware Guide - Page 38
Attaching Memory Unit Type D 128MB, Memory Unit Type E 256MB (SDRAM Module
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Attaching Memory Unit Type D 128MB, Memory Unit Type E 256MB (SDRAM Module) Attaching Memory Unit Type D 128MB, Memory Unit Type E 256MB (SDRAM Module) R CAUTION: • Do not touch the inside of the controller board compartment. Doing so may 2 cause a malfunction or a burn. Important ❒ Be sure to install SDRAM modules after installing the hard disk drive. ❒ Before touching the memory unit, ground yourself by touching something metal to discharge any static electricity. Static electricity can damage the memory unit. ❒ Do not subject the memory unit to physical shocks. ❒ Available memory varies depending on a model type. ❒ Before using the new memory unit, Be sure to make settings in the printer driver. A Turn off the printer. B Pull out the first paper tray (Tray 1) and take the screwdriver (1) from the tray. Each screw to be removed requires this screwdriver. AQV222S 27