Samsung RF4289HARS User Manual (user Manual) (ver.0.1) (English, Spanish) - Page 10

If the right side is lower, perform the same procedure, but with the right control lever. It is difficult to remove the front leg cover from the refrigerator, so we do not recommend making small adjustments wIth the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors. 1. After adjusting the doors, insert the supplied fastener ( 6 ) using a pliers ( 5 ) in the gap between the hinge-grommet ( 7 ) and the lower hinge ( 8 ). The number of fasteners you'll need to insert depends on the gap. Making minor adjustments between doors Remember, a leveled refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the refrigerator. 2 fastener are enclosed with the refrigerator. The thickness of each fastener is 0.04". Adjusting the freezer drawer level Adjustment part Adjustment Fixed part part The left door is fixed. To make minor adjustments between doors, adjust only the right door. 1. Pull out the Flex Zone door ( 1 ) to expose the lower hinge ( 2 ). 2. Insert the supplied allen wrench (3/16") ( 3 ) into the shaft ( 4 ) of the lower hinge. 3. Adjust the height by turning the hex wrench ( 3 ) clockwise ( DOWN ) or counter-clockwise ( UP ). 2 3 3 4 1 When you turn the hex wrench counterclockwise ( ), the door will move up. Freezer Drawer 1. Locate the height-adjuster ( 1 ) in the freezer drawer. Unscrew the 8 Phillips screws ( 2 ) slightly to loosen the door. 1 2 2. Loosen the controller screw ( 3 ) with a Phillips screwdriver (+). 3 10_ setting up