Samsung RF4289HARS User Manual (user Manual) (ver.0.1) (English, Spanish) - Page 9
Assemble The Flex Door, Disassemble The Freezer, Drawer, Assemble The Freezer Drawer, Leveling - energy
UPC - 036725560529
View all Samsung RF4289HARS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
01 setting up ASSEMBLE THE FLEX DOOR Assemble the freezer drawer To reattach the flex door after you have moved the fridge To reattach the drawer after you have moved the fridge to its final location, assemble parts in reverse order. to its final location, assemble parts in reverse order. Disassemble the freezer drawer 1. Take out the upper drawer by lifting it up. 2. Remove the tilting pocket ( 1 ) by pulling both support guards ( 2 ) aside. And take out both support guards by pulling them aside. 1 2 3. Take out the lower basket ( 3 ) by lifting the basket up from 3 the rail system. 4. Remove 4 hex head bolts from both sides with a socket wrench (10mm). LEVELING THE REFRIGERATOR Make sure the refrigerator is level so that you can make final adjustments. Use a level to test if the refigerator is level both side to side and back to front. If the refrigerator is not level, it will not be possible to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how to level the refrigerator if the left side of the refrigerator is lower than the right side. How to adjust the level 1. Open the freezer drawer and remove the lower 2 basket. (See to page 9) 2. Remove the two screws 1 ( 1 ) attached to the front leg cover ( 2 ) with a Philips screwdriver (+). 3. Remove the front leg cover ( 2 ) by lifting the bottom part of the front leg cover up and pulling it out. 4. Insert a flat-blade screwdriver (-) into a notch on the left control lever, and turn it count clockwise to level the refrigerator. (You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.) 5. Lift up the freezer door from the rails. Flat-Blade Screwdriver(-) Control Lever Both control levers must be touching the floor caution to avoid possible personal injury or property damage because of tipping. setting up _09