Samsung SRV-960A User Manual - Page 67
Disk Setup
View all Samsung SRV-960A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
User Manual Save update firmware in USB and connect it to DVR Select firmware update item in the system menu and press ENTER When there is question to update or not, peas Y and ENTER. The device reboot with buzzer sound. The firmware for USB update is formed in "*.dat" file. Firmware update via network is perform update file and select the DVR to update and click on it. When there is IP and MAC address, port for the selected DVR, type the password "(default:11111111) at Admin's Password" SNM-128S and press "Starting upgrade" Rebooting message pops up after upgrade and press "Y" Load Configuration It sets DVR setup value stored in USB memory by transmitting to DVR. Save Configuration Save preset setup status of DVR to USB device. Default It used when it sets existing set value to first factory value to ship. To create first value press "Default". System Log It can check the condition of setup change of system or HDD status, HDD condition, Power condition, System alarm etc happen. 6.10.2 Disk Setup Next explains the method how internal, external HDD add or delete or format. 67