Schwinn 490 Elliptical Service Manual - Page 22

Replace the Cables, on the Schwinn, 590e Ellipticals

Page 22 highlights

Replace the Cables Replacement Procedure ™ on the Schwinn™ 490 / 590e Ellipticals Skill Level: II Estimated Procedure Time: 25-30 minutes NOTICE: This document provides instructions for the replacement of the Cables on the Schwinn™ 490 / 590e Ellipticals. 8030512.071523.A If you need assistance, please contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside US/Canada). To find your local distributor, go to: www.nautilusinternational.com This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all Warnings on this machine. Nautilus, Inc., www.nautilus.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America (800) 605-3369, [email protected] | outside U.S. www.nautilusinternational.com | Printed in China | © 2023 Nautilus, Inc. | Schwinn and the Schwinn logo are trademarks owned or licensed by Nautilus, Inc., registered or otherwise protected by common law in the United States and other nations. | ORIGINAL DOCUMENT - ENGLISH VERSION ONLY Important Safety Instructions - Before servicing or using this equipment, obey the following warnings: This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all Warnings on this machine. To reduce the risk of electrical shock or unsupervised usage of the equipment, always ! unplug the power cord from the wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place the power cord in a secure location. • Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings could cause injury to the service technician or bystanders. • Keep bystanders and children away from the product being serviced at all times. • Disconnect all power to the machine before you service it. • Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders. • Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these components. Do not try to do heavy or awkward steps on your own. • Use only replacement parts and hardware that are supplied or approved by Nautilus. Failure to use Nautilus-approved replacement parts can adversely affect the safety and functionality of the equipment creating a risk to users and will void the warranty. • Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or replacing components. If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased in US/Canada, contact Customer Service for replacement labels. If purchased outside US/ Canada, contact your local distributor for them. • Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety. • Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance. • SAVE THESE INSTRUCTIONS Tools Required (not included) 4mm hex wrench 6mm hex wrench Piece of string or wire, about 60 cm (24 inches) long Standard screwdriver Zip-Ties (Replacements) Something to cut a Zip-Tie 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86

22
Replace the Cables
on the Schwinn
490 / 590e Ellipticals
Skill Level: II
Estimated Procedure Time: 25-30
minutes
8030512.071523.A
Replacement Procedure
Tools Required (not included)
4mm hex wrench
6mm hex wrench
Piece of string or wire, about 60 cm (24 inches) long
Standard screwdriver
Zip-Ties (Replacements)
Something to cut a Zip-Tie
NOTICE:
This document provides instructions for the replacement of the Cables on the Schwinn
490 / 590e Ellipticals.
If you need assistance, please contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside
US/Canada). To find your local distributor, go to: www.nautilusinternational.com
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Read and understand all Warnings on this machine.
Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Read and understand all Warnings on this machine.
!
To reduce the risk of electrical shock or unsupervised usage of the equipment, always
unplug the power cord from the wall outlet and wait 5 minutes before cleaning, maintaining
or repairing this machine. Place the power cord in a secure location.
• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and
safety warnings could cause injury to the service technician or bystanders.
• Keep bystanders and children away from the product being serviced at all times.
• Disconnect all power to the machine before you service it.
• Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.
• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do
maintenance steps involving these components. Do not try to do heavy or awkward steps on your own.
Use only replacement parts and hardware that are supplied or approved by Nautilus. Failure to use Nautilus-approved
replacement parts can adversely affect the safety and functionality of the equipment creating a risk to users and will void the
warranty.
Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when
doing maintenance or replacing components.
If at any time the Warning labels become loose, unreadable or dislodged,
replace the labels. If purchased in US/Canada, contact Customer Service for replacement labels. If purchased outside US/
Canada, contact your local distributor for them.
• Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety.
• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested
for correct performance.
SAVE THESE INSTRUCTIONS
Nautilus, Inc., www.nautilus.com, 5415 Centerpoint Parkway, Groveport, OH 43125
U.S.A. - Customer Service: North America (800) 605-3369, [email protected] | outside U.S.
www.nautilusinternational.com | Printed in China | © 2023 Nautilus, Inc. | Schwinn and the Schwinn logo are trademarks owned or licensed by Nautilus, Inc., registered or otherwise
protected by common law in the United States and other nations.
|
ORIGINAL DOCUMENT - ENGLISH VERSION ONLY