Schwinn 490 Elliptical Service Manual - Page 63
Replacing the Front Upper Shroud
View all Schwinn 490 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Section 2 - Replacing the Front Upper Shroud 1. If replacing the Upper Front Shroud, remove the hardware (indicated with oval) that attaches the Console Mast with a 6mm hex wrench. 2. Slightly lXift4the Console Mast from the Frame Assembly and disconnect the Cables. Fully remove the Console Mast with Cables. 6mm Note: Do not pinch or cute the Cables. Do not allow the Cable to fall into the Frame Assembly. Console Mast Upper Front Shroud Console Cable 63
63
Section 2 - Replacing the Front Upper Shroud
1.
If replacing the Upper Front Shroud, remove the
hardware (indicated with oval) that attaches the Console
Mast with a 6mm hex wrench.
2.
Slightly lift the Console Mast from the Frame Assembly
and disconnect the Cables. Fully remove the Console Mast
with Cables.
Note:
Do not pinch or cute the Cables. Do not allow the
Cable to fall into the Frame Assembly.
Console
Mast
Upper
Front
Shroud
Console Cable