Sharp AL 1661CS AL-1661CS Facsimile Operation Manual - Page 19

INITIAL SETTINGS 7 89 2 22 23 24 25 26 27 28 15 [REPORT] key Press this key to print out a report of a fax transaction and also when receiving a confidential fax. 16 [SPEAKER] key Press this key to begin manual dialing. (To close the line, press the [SPEAKER] key again.) 17 [2-SIDED TX] key Press this key to fax a two-sided original. 18 [MODE SELECT] key / Mode indicators Press this key to select the mode. The indicator of the selected mode lights (copy, printer, scanner, fax mode indicators). 19 RSPF indicator This lights up when an original is placed in the RSPF. 20 Error indicator This lights steadily or blinks when a paper misfeed or other error occurs. 21 Tray location indicator Indicates the selected paper tray. The indicator blinks when the tray is out of paper or is not closed. 22 [MENU] key Press this key to configure a user program. 23 [ ] key ( ), [ ] key ( ), [ENTER] key Press the [ ] key ( ) or [ ] key ( ) to select an item in a function setting menu. Press the [ENTER] key to enter a selection. 24 [ ] key Press this key to enter symbols during a name storing procedure. Press the " " key to change from pulse dialing to tone dialing mode. 25 Numeric keys Press these keys to dial numbers, and enter numbers and letters during number/name storing procedures. 26 [#] key Press this key to enter symbols during a name storing procedure. The [#] key scrolls through symbols in the opposite direction of the [ ] key. When dialing, press this key after you are finished scanning originals into memory from the document glass. 27 [START] key ( )/ indicator Used for the following: • To begin sending a fax. • Reading an original into memory from the document glass. • Manually receiving a fax. • Entering and setting information. 28 Power save indicator This lights up when the power save function is activated. 15