Sharp AL 1661CS AL-1661CS Facsimile Operation Manual - Page 46

to select the international

Get Sharp AL 1661CS - B/W Laser - All-in-One PDF manuals and user guides
UPC - 074000074606
View all Sharp AL 1661CS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

INITIAL SETTINGS 10 Enter the name of the destination with the numeric keys. Enter the name of the location or party by pressing numeric keys as described in "HOW TO ENTER CHARACTERS" on page 20 (maximum of 20 characters). If you do not want to enter a name, skip this step. 11 Press the [ENTER] key. 12 Press the [ ] key ( ) or [ ] key ( ) to select a Chain Dial setting. If you wish to set the number as a Chain Dial number, select "1:SET". Otherwise, select "2:CANCEL". (See "CHAIN DIALING" (p.59)) If the number is not set as a chain dial number, the communication speed and international communication mode cannot be selected. Press the [ENTER] key and go to step 18. 13 Press the [ENTER] key. 14 Press the [ ] key ( ) or [ ] key ( ) to select the communication speed. The selections are as follows: 1:33600bps 2:14400bps 3:9600bps 4:4800bps Note For international dialing, if you find that line noise necessitates a slower transmission speed, set the appropriate transmission speed. If you are not sure if a slower speed is required, set the speed normally. 42 15 Press the [ENTER] key. 16 Press the [ ] key ( ) or [ ] key ( ) to select the international communication mode. The selections are as follows: 1:NO 2:MODE 1 3:MODE 2 4:MODE 3 Note Sometimes when faxing internationally, line noise can cause the transmission to stop momentarily. To reduce these delays, choose the appropriate international transmission mode. 17 Press the [ENTER] key. Return to Step 5 to store another number. 18 Press the [CLEAR ALL] key ( ). Note Press the [CLEAR ALL] key ( ) a number of times until you exit. If the number is a Rapid key number, you can write the name on the label above the appropriate Rapid key. You may need to add a pause between certain digits in the number to allow time for connection. For example, if you are on a PBX telephone system that requires an access number, such as "9", to be dialed to access an outside line, you will need to enter a pause between the access number and the fax number of the other party. Pauses are entered by pressing the [REDIAL/PAUSE] key (2 seconds per pause). If necessary, several pauses can be entered in a row.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
42
INITIAL SETTINGS
10
Enter the name of the destination with
the numeric keys.
Enter the name of the
location or party by
pressing numeric keys as
described in "HOW TO
ENTER CHARACTERS"
on page 20 (maximum of
20 characters). If you do
not want to enter a name,
skip this step.
11
Press the [ENTER] key.
12
Press the [
] key (
) or [
] key (
)
to select a Chain Dial setting.
If you wish to set the
number as a Chain Dial
number, select "1:SET".
Otherwise, select
"2:CANCEL".
(See "CHAIN DIALING"
(p.59))
If the number is not set as a chain dial number,
the communication speed and international
communication mode cannot be selected. Press
the [ENTER] key and go to step 18.
13
Press the [ENTER] key.
14
Press the [
] key (
) or [
] key (
)
to select the communication speed.
The selections are as
follows:
1:33600bps
2:14400bps
3:9600bps
4:4800bps
15
Press the [ENTER] key.
16
Press the [
] key (
) or [
] key (
)
to select the international
communication mode.
The selections are as
follows:
1:NO
2:MODE 1
3:MODE 2
4:MODE 3
17
Press the [ENTER] key.
Return to Step 5 to store
another number.
18
Press the [CLEAR ALL] key (
).
Press the [CLEAR ALL]
key (
) a number of
times until you exit.
If the number is a Rapid
key number, you can
write the name on the
label above the
appropriate Rapid key.
For international dialing, if you find that line
noise necessitates a slower transmission
speed, set the appropriate transmission
speed. If you are not sure if a slower speed
is required, set the speed normally.
Note
Sometimes when faxing internationally, line
noise can cause the transmission to stop
momentarily. To reduce these delays,
choose the appropriate international
transmission mode.
You may need to add a pause between
certain digits in the number to allow time for
connection. For example, if you are on a
PBX telephone system that requires an
access number, such as "9", to be dialed to
access an outside line, you will need to
enter a pause between the access number
and the fax number of the other party.
Pauses are entered by pressing the
[REDIAL/PAUSE] key (2 seconds per
pause). If necessary, several pauses can be
entered in a row.
Note
Note