Sharp AL 1661CS AL-1661CS Facsimile Operation Manual - Page 93
the other end.
UPC - 074000074606
View all Sharp AL 1661CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
TROUBLESHOOTING Problem Cause and solution Page The telephone line cord is not correctly connected to the Dialing cannot be done. machine and the wall telephone jack. 11 oMake sure the telephone line cord is securely connected. The receiving machine is out of paper. oCheck with the operator of the receiving machine. - No transmission takes place. The receiving machine does not support the G3 standard. oCheck with the operator of the receiving machine. - An error is displayed. oCheck the display of the machine. 90 Nothing is printed at the receiving end. If a blank sheet of paper is output together with a normally received fax, the machine's paper size setting may be different from the size of paper actually loaded in the machine. 29 oMake sure that the paper size setting matches the size of paper loaded in the machine. Noise on the line may cause a distorted image. Try sending the A distorted image is received at the other end. fax again, or make a copy on your machine and see if the copy is distorted. oIf the image is still distorted, consult the retailer or dealer where - you bought the machine. The transmitting machine may be using a light contrast setting. The received original is faint. oAsk the operator of the transmitting machine to send the fax using - a darker contrast setting. Noise on the line may cause a distorted image. oAsk the operator of the transmitting machine to send the fax - again. Received images are distorted. The TD cartridge may be running out of toner. oReplace the TD cartridge. Operation Manual (for general information) Note If your problem cannot be solved by carrying out the instructions in the Check and Remedy column above, please contact your SHARP dealer. 6 89