Sharp AL 1661CS AL-1661CS Facsimile Operation Manual - Page 26
Setting The Date And Time
UPC - 074000074606
View all Sharp AL 1661CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
INITIAL SETTINGS 8 Press the [ENTER] key. 9 Press the [ ] key ( ) or [ ] key ( ) until "2:ENTRY MODE" appears, and then press the [ENTER] key. Selection "2:ENTRY MODE" "STORED" will appear in the display. 10 Press the [CLEAR ALL] key ( ). Press the [CLEAR ALL] key ( ) to exit. SETTING THE DATE AND TIME The date and time that appear in the display are printed at the top of each page you transmit. Set the date and time by pressing the keys on the operation panel as shown below. If you enter an incorrect number, press the [CLEAR] key ( ) and re-enter the number. The time can be displayed in 12-hour or 24-hour format. "Month/Day/Year", "Day/Month/Year" or "Year/Month/Day" can be selected for the order of display of the date. Use the following procedure to set the date and time: 1 Press the [MENU] key. 5 Enter the time with the numeric keys. 6 Press the [ ] key ( ) or [ ] key ( ) to select "AM" or "PM". When 24-hour format is selected, do not perform this step. 2 Press the [ ] key ( ) or [ ] key ( ) until "2:ENTRY MODE" appears, and then press the [ENTER] key. Selection "2:ENTRY MODE" 7 Press the [ENTER] key. 3 Press the [ ] key ( ) or [ ] key ( ) until "2:DATE&TIME SET" appears, and then press the [ENTER] key Selection "2:DATE&TIME SET" 4 Enter the year, month, and day with the numeric keys and then press the [ENTER] key. 8 Press the [CLEAR ALL] key ( ). Press the [CLEAR ALL] key ( ) to exit. 22