Sharp AL 1661CS AL-1661CS Facsimile Operation Manual - Page 45
Storing Numbers For Automatic Dialing
UPC - 074000074606
View all Sharp AL 1661CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
INITIAL SETTINGS STORING NUMBERS FOR AUTOMATIC DIALING Automatic Dialing is a quick and convenient way to dial by using only a Rapid key (Rapid Key Dialing), or pressing the [SPEED/SEARCH] key and select the SPEED and entering a two digit number (Speed Dialing). To use Automatic Dialing, you must first store the full number. The way you store it depends on whether you want to use it for Rapid Key Dialing or Speed Dialing: Storing numbers Use the following procedure to store numbers for Rapid Key Dialing or Speed Dialing: 1 Press the [MENU] key. 2 Press the [ ] key ( ) or [ ] key ( ) until "2:ENTRY MODE" appears, and then press the [ENTER] key. 6 Press the Rapid Key or enter the Speed Dial number that you wish to program. SPEED/ BROAD- RECEPTION REDIAL/ MEMORY SEARCH CAST MODE PAUSE RESOLU- COVER 2-SIDE TION CONTRAST SHEET REPORT TX LINE STATUS SPEAKER To program a Rapid Key, press a Rapid key ("01" to "18"). To program a Speed Dial number, press two numeric keys ("00" to "99"). 2 7 Press the [ENTER] key. Selection "2:ENTRY MODE" 3 Press the [ ] key ( ) or [ ] key ( ) until "1:FAX NUMBER" appears, and then press the [ENTER] key. Selection "1:FAX NUMBER" 4 Press the [ ] key ( ) or [ ] key ( ) to select the type of auto-dial number that you wish to program. To program a Rapid Key, select "1:RAPID KEY". To program a Speed Dial number, select "2:SPEED #". 8 Enter the fax number with the numeric keys. Enter the fax number (maximum of 40 digits including pauses) using the numeric keys. 9 Press the [ENTER] key. 5 Press the [ ] key ( ) or [ ] key ( ) until "1:SET" appears, and then press the [ENTER] key. Selection "1:SET" 41