Sharp FO-2970M Service Manual - Page 3

FO-2970MU CHAPTER 1. GENERAL DESCRIPTION [1] Specifications • GENERAL Automatic dialing Rapid Key Dialing: 20 numbers Speed Dialing: 100 numbers Memory size* 4 MB (approx. 300 pages) Modem speed 33,600 bps (max.) Automatic fallback to lower speeds. Transmission time* Approx. 3 seconds Toner cartridge yield (4% page coverage, letter paper) Initial starter cartridge (included with fax machine): Approx. 1,875 pages Replacement cartridge (FO-29ND): Approx. 3,750 pages Drum cartridge yield Initial starter cartridge (included with fax machine): 20,000 pages (avg.) Replacement cartridge (FO-29DR): 20,000 pages (avg.) Scanning resolution Fax/copy: Horizontal: 203 pels/inch (8 pels/mm) Vertical: Standard: 98 lines/inch (3.85 lines/mm) Fine /Halftone: 196 lines/inch (7.7 lines/mm) Super fine: 391 lines/inch (15.4 lines/mm) PC: Enhanced 600 dpi Automatic document feeder 20 pages max. (20-lb. letter paper) Halftone (grayscale) 64 levels (PC scan: 256 levels) Paper tray capacity 200 sheets (20-lb. letter paper) Compression scheme MMR, MR, MH, Sharp (H2) Applicable telephone line Public switched telephone network Compatibility ITU-T (CCITT) G3 mode Effective Scanning width 8.3" (210 mm) max. Effective Printing width 8.0" (208 mm) max. Reception modes Fax/Tel/A.M. Scanning speed 8 ppm (letter paper) Full Dual Access Yes Copy function Single/Multi/Sort (99 copies/page) Power requirements 120 V AC, 60 Hz Operating temperature 50 - 86°F (10 - 30°C) Humidity 20 to 85% RH Power consumption Standby: 8.1 W Maximum: 650 W Dimensions Width: 15.2" (386 mm) Depth: 15.7" (398 mm) Height: 6.7" (169 mm) Weight Approx. 13.8 lbs. (6.3kg) * Based on ITU-T Test Chart #1 at standard resolution in Sharp special mode, excluding time for protocol signals (i.e., ITU-T phase C time only). Important: • This facsimile machine is not designed for use on a line which has call waiting, call forwarding, or certain other special services offered by your telephone company. If you attempt to use the fax machine in conjunction with any of these services, you may experience errors during transmission and reception of facsimile messages. • This facsimile machine is not compatible with digital telephone systems. Printing resolution Horizontal: 406 lines/inch (16 lines/mm) Vertical: 391 lines/inch (15.4 lines/mm) PC Printing: 600 dpi (enhanced 1,800 dpi) Input document size Automatic feeding: Width: 5.8 to 8.5" (148 to 216mm) Length: 5.5 to 11" (140 to 279mm) Manual feeding: Width: 5.8 to 8.5" (148 to 216mm) Length:5.5 to 39.4" mm (140 to 1,000mm) As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specifications figures indicated are nominal values of production units. There may be some deviations from these values in individual units. 1 - 1