Sharp GX20 Service Manual - Page 16
Preparation, Default setting for the program.
View all Sharp GX20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
GX20 CONFIDENTIAL 2) Preparation • Connect PC and GSM tester with a GPIB cable. • Connect PC and MS with a Data cable. (Use a full charged battery or one close.) • Connect an antenna input/output cable of GSM tester to MS. 3) Default setting for the program. • Activate the program and set defaults. 1) Select the COM port. 2) Set the GPIB No. 3) Select the test instrument. 4) Set the GPIB address. 5) Set the cable loss. For the supplied cables (YA00-0988-03), set: GSM 0.60 DCS 0.95 PCS 0.96 Figure 23 2 - 10
GX20
2 – 10
CONFIDENTIAL
2) Preparation
•
Connect PC and GSM tester with a GPIB cable.
•
Connect PC and MS with a Data cable. (Use a full charged battery or one close.)
•
Connect an antenna input/output cable of GSM tester to MS.
3) Default setting for the program.
•
Activate the program and set defaults.
Figure 23
1) Select the COM port.
2) Set the GPIB No.
3) Select the test instrument.
4) Set the GPIB address.
5) Set the cable loss. For the
supplied cables
(YA00-0988-03), set:
GSM 0.60
DCS 0.95
PCS 0.96