Sharp GX20 Service Manual - Page 71
Basic, procedure when using Hyper terminal, Flow chart
View all Sharp GX20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
• Basic procedure (when using Hyper terminal) CONFIDENTIAL Flow chart Connect the phone to PC. Turn on the phone. Open Hyper terminal. Send "AT+XDIAG" with 115200 bps and proper "ASCII setting". The phone is in the All key test mode. * Send further commands to check the phone. * : Keys are disabled if you enter the All Key test mode by AT command. To avoid this, perform steps on page 2-76. GX20 2 - 65
GX20
2 – 65
CONFIDENTIAL
•
Basic
procedure (when using Hyper terminal)
* :
Keys are disabled if you enter the All Key test mode by AT command. To avoid this, perform steps on page 2-76.
Flow chart
Connect the phone to PC.
Turn on the phone.
Open Hyper terminal.
Send “AT+XDIAG” with 115200 bps and proper
“ASCII setting”.
The phone is in the All key test mode. *
Send further commands to check the phone.