Sharp GX20 Service Manual - Page 34
Matters to be attended to the Installation /Uninstallation
View all Sharp GX20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
GX20 CONFIDENTIAL 3.3.6 Matters to be attended to the Installation /Uninstallation • If installing the Up Ggrading Tool to the PC that the tool has been already installed, uninstall the preloaded tool first then start installing the program again. • If you are performing the Up Ggrading Tool on Windows 98, 98SE and Me operation system, a message may appear asking you to restart up the operation system during the installation. In this case, please restart your operation system according to the instruction. Even if such massages do not appear, restart your operation system after the installation has been completed. Note) If you are using Windows 98 and trying to activate the Up Grading Tool without restarting the operation system, the following message may appear. In this case, you need to restart your operation system for the proper operation of the Up Grading Tool. Figure 53 Attachment 3 Reset Tool for the phone code Reset the phone code to "0000". 1) Connect the Reset tool to the cable. 2) Execute "PWDinit.exe". 3) Press the power key to access the idle mode. ("InsertSIM" is displayed.) 4) Press "Set to Default". 5) Enter "2968" and press "OK". Figure 54 Figure 55 2 - 28