Sharp GX20 Service Manual - Page 57
Speaker does not operate.
View all Sharp GX20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
7. Speaker does not operate. CONFIDENTIAL * When ring tones sound but only key touch tones do not, "Keypad Tones" are set to OFF. * When the ring tone volume is set to "Silent", Voice Memo is not played back. Do speaker terminals contact with the land? NO Speaker defective. GX20 YES Resistance of 8 ohms available between the speaker terminals? YES Signal output at the speaker land on the Relay FPC_A? NO Speaker defective. YES Speaker defective. NO Signal output at TP110/TP111? NO YES VBAT_AP Voltage applied to IC103 15pin? NO VBAT_AP voltage applied to Relay FPC_A of R182? YES R172, R173 and CN201 defective or Relay FPC_A break- ing defective. NO Relay FPC_A and CN305 defective. YES Does the speaker function after replacing R182? YES R182 defective. NO Voltage of approx. 3 V applied to IC103 7 pin? NO Jumper (IC103 5 pin to VINT line) defective. YES Signal output at IC103 12 pin? YES R122, R123 or IC103 defective. NO IC103 defective or control signal line to IC104 defective. 2 - 51