Sharp GX20 Service Manual - Page 84

GX20 Key "" CONFIDENTIAL Shifting to the mode for temperature correction. Contents TEMP ADJ 1. CAM TEMP 2. BAT TEMP 0. EXIT "1" (Selecting the camera side) or "2" (Selecting the battery side) "0" Exit TEMP ADJ (BAT) Temp. : +23 Deg.. Correct : --05 Deg. " " KEY : +1 Deg.. " " KEY : --1 Deg.. " ": +1 ºC Correction in the correction mode. " ": -1 ºC Correction in the correction mode. "#": Determination of corrected value. TEMP is not updated automatically. Press the key "0" to return to the all key test initial screen. Note) Display: No temperature correction during the all key test; Display in the user contrast setting default condition. * : Display in the external display contrast adjustment mode 6. Initializing Flash User Domain (Manual Test Mode F99) Only use the troubleshooting procedure, "Power does not turn on" (page 2 - 42). Take care that the user setting data will be lost in this operation. Before starting this mode, be sure to backup the user data, referring to "SOFTWARE DOWNLOAD." 1. Fit a battery in the set to start the manual test mode. 2. Press the keys, "9" → "9" → "Right Soft", to start the manual test mode F99 (User Function). 3. When "Select Init Area: " is displayed on the screen, enter "1" and press the key "Right Soft". 4. "EE_FORMAT START" is displayed on the screen. 5. When initialization ended, [FINISHED PLEASE ANY KEY] is displayed on the lower part of the screen. 6. Press any key to return to the F99 initial screen. 7. Press the "Centre" key. 8. Press the "End/Power" key to finish operation. After initialization, start up in the general mode. 2 - 78