Sharp GX20 Service Manual - Page 26
Serial connection port, Cable 1., Power On/Off, button., Set to OFF for, the initial status.
View all Sharp GX20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
GX20 CONFIDENTIAL 3) Using the Communication Box. Check the dialog box "Use Communication Box Ver. 2G" displayed on your PC if using "Communication Box Ver. 2G". You can specify the wait time from 0 to 999 seconds since the access latency differs depending on the phone if using "Communication Box Ver. 2G". (Default value is set to 100 seconds). Serial connection port Power On/Off button. Set to OFF for the initial status. Cable 1. Figure 41 Image of Communication Box Ver. 2G [Caution] Cable 1 is used for the handshaking between the PC and the phone. Make sure that cable is properly connected to the phone while the handshaking if using "Communication Box Ver. 2G". Switch on the power buttons from No.10 to No.1 when "Sending Sync Byte.../Press Power Button" message appears. You may turn on the power switch as necessary. 2 - 20