Sharp GX20 Service Manual - Page 8
Functions, 3.1 Identification - data cable
View all Sharp GX20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
GX20 2) If SPC is correct, the following screen appears. CONFIDENTIAL Figure 2 The software for each function is independent and thus multi-bootable. However, you can only activate single software at a time. To start snother software, exit the current one. 3) Click the "Change Password" button in Step 1. The screen below appears and you can change SPC. 3.3. Functions 3.3.1 Identification SPST downloads and displays the main data configured in GX20. 1) On the SPST startup screen, press "Identity". Figure 3 2) Connect PC and MS with a Data cable. 3) Remove the SIM card and turn on the phone. → Regular display. 4) Select the COM port. 5) Press "Get Identity". → The information will be displayed. Figure 4 2 - 2
GX20
2 – 2
CONFIDENTIAL
2)
If SPC is correct, the following screen appears.
Figure 2
The software for each function is independent and thus multi-bootable. However, you can only activate single software at a time. To start snother
software, exit the current one.
3)
Click the “Change Password” button in Step 1. The screen below appears and you can change SPC.
Figure 3
3.3. Functions
3.3.1 Identification
SPST downloads and displays the main data configured in GX20.
<Operation>
1)
On the SPST startup screen, press “Identity”.
Figure 4
2)
Connect PC and MS with a Data cable.
3)
Remove the SIM card and turn on the phone.
→
Regular display.
4)
Select the COM port.
5)
Press “Get Identity”.
→
The information will be displayed.