Singer 2250 Tradition Instruction Manual - Page 51

Sewing on buttons

Page 51 highlights

1 2 GB Sewing on buttons Install the darning plate. (1) Change presser foot to button sewing foot. (2) Position the work under the foot. Place the button in the desired position and lower the foot. Set the pattern selector knob on " " and sew a few securing stitches. Select one of the two narrow zig-zag patterns according to the distance between the two holes of the button. Turn the handwheel to check if the needle goes into the right and the left hole of the button without hitting the button. Slowly sew on the button with about 10 stitches. Select pattern " " and sew a few securing stitches. (3) If a shank is required, place a darning needle on top of the button and sew (4). For buttons with 4 holes, sew through the front two holes first (3), push the work forward and then sew through the back two holes. (4) 3 4 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82

Install the darning plate. (1)
Change presser foot to button sewing foot. (2)
Position the work under the foot.
Place the button in the desired position and lower the foot.
Set the pattern selector knob on "
" and sew a few securing
stitches.
Select
one
of
the
two
narrow
zig-zag
patterns
according to the distance between the two holes of the button.
Turn the handwheel to check if the needle goes into the right
and the left hole of the button without hitting the button. Slowly
sew on the button with about 10 stitches.
Select pattern "
" and sew a few securing stitches. (3)
If a shank is required, place a darning needle on top of the
button and sew (4). For buttons with 4 holes, sew through
the front two holes first (3), push the work forward and then
sew through the back two holes. (4)
44
GB
Sewing on buttons
4
3
1
2