Sony Ericsson Xperia P User Guide - Page 106
Focus mode, Video size, Self-timer, Exposure value, White balance, Single autofocus, Face detection
View all Sony Ericsson Xperia P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Focus mode The focus setting controls which part of a video should be sharp. When continuous autofocus is on, the camera keeps adjusting focus so that the area within the white focus frame stays sharp. Single autofocus The camera automatically focuses on the selected subject. Continuous autofocus is on. Face detection The camera automatically detects up to five human faces, indicated by frames on the screen. The camera automatically focuses on the nearest face. You can also select which face to focus on by tapping it on the screen. When you tap the camera screen, a green frame shows which face is selected and in focus. Face detection cannot be used for all scene types. Continuous autofocus is on. Infinity Use when recording videos from a distance. Focus is set on subjects far away. Subjects close to the camera may be blurred. Video size Adjust the video size for different formats. Full HD Full HD (Full High Definition) format with 16:9 aspect ratio. 1920×1080 pixels. HD 720p HD (High Definition) format with 16:9 aspect ratio. 1280×720 pixels. VGA VGA format with 4:3 aspect ratio. 640x480 pixels. Multimedia message Record videos suitable for sending in multimedia messages. The recording time of this video format is limited to fit in a multimedia message. Self-timer With the self timer you can record a video without holding the phone. Use it to record group videos where everyone can be in the video. You can also use the self-timer to avoid shaking the camera when recording videos. On (10 sec.) Set a 10-second delay from when you tap the camera screen until the video begins to record. On (2 sec.) Set a 2-second delay from when you tap the camera screen until the video begins to record. Off The video begins to record as soon as you tap the camera screen. Exposure value This setting allows you to determine the amount of light in the image you capture. A higher value indicates an increased amount of light. White balance The white balance setting adjusts the color balance according to the lighting conditions. Auto Adjust the color balance automatically to the lighting conditions. Incandescent Adjusts the color balance for warm lighting conditions, such as under light bulbs. Fluorescent Adjust the color balance for fluorescent lighting. Daylight Adjust the color balance for sunny outdoor conditions. Cloudy Adjust the color balance for a cloudy sky. 106 This is an Internet version of this publication. © Print only for private use.