Sony Ericsson Z200 User Guide - Page 22

The infrared (IR) port The infrared port can be used to transfer and exchange information with another device equipped with an infrared port. See "Getting to know your phone" on page 6 to locate the infrared port. When used with certain functions, such as sending a picture, IR is automatically activated for a short while. Note: Infrared ports must be facing each other at a distance of 20 to 30 cm when used. The infrared port can be activated in the following ways: • Press from standby, scroll to Activate IR, YES. • Scroll to Connectivity, YES, Infrared port, YES, select an option, YES. • When selecting a transfer method, for example when sending a picture. Calling Use the phonebook, call options Making calls Before you can make or receive any calls, you must turn on the phone and be within range of a network. See "SIM card and battery information" on page 4. Tip: You can call numbers from the call list and the phonebook. See "Call list" on page 25 and "Phonebook" on page 25. To make a call 1. Enter the area code and the phone number, and press YES to make the call. 2. Press NO or close the phone to end the call. See "Flip functions" on page 20. To turn infrared off Scroll to Connectivity, YES, Infrared port, YES, Off, YES. During calls You can increase or decrease the speaker volume during a call. The microphone must be turned on to change the speaker volume during a call. 22 Calling This is the Internet version of the user's guide. © Print only for private use.