Sony Ericsson Z200 User Guide - Page 4
Your PIN Personal Identity Number is provided by, SIM card and battery information - charger
UPC - 879889008748
View all Sony Ericsson Z200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
SIM card and battery information Always turn off the phone and detach the charger before you insert or remove a SIM card. To insert the SIM card and charge the battery 1. Insert the SIM card. Make sure the SIM card is placed under the silvery holders. 2. Place the battery on the back of the phone with the connectors facing each other, and push until you hear a click. 3. Place the back cover into the slots on the phone and push until you hear a click. 4. Connect the charger to the phone at the flash symbol with the symbol on the charger plug facing upwards. 5. It may take up to 30 minutes before the battery charging icon appears in the display. 6. Wait approximately 4 hours or until the icon indicates that the battery is fully charged. If you do not see the battery icon after this time, press any key to activate the display. 7. Remove the charger by tilting the plug upwards. Turning on the phone and making calls Your PIN (Personal Identity Number) is provided by your network operator but not all operators require a PIN to activate services. If your PIN starts with the same digits as an emergency number, for example 112, the digits are not hidden with an * when you enter them. This is so 4 Getting started This is the Internet version of the user's guide. © Print only for private use.