Sony DSX-S210X Operating Instructions - Page 11

Radio Storing and receiving stations Caution When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically - BTM 1 Press (SOURCE/OFF) repeatedly until "TUNER" appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2. 2 Press and hold the multi-way encoder. 3 Rotate the multi-way encoder to select "BTM," then press it. The unit stores stations in order of frequency in the preset list. A beep sounds when the setting is stored. 3 Press the multi-way encoder to receive the station. The display returns to normal reception mode. (with the card remote commander) 1 Select the band, then press a number button ((1) to (6)). Tuning automatically 1 Select the band, then push the multi- way encoder left/right to search for the station. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. Tip If you know the frequency of the station you want to listen to, push and hold the multi-way encoder left/right to quickly locate the approximate frequency, then push the multi-way encoder left/right repeatedly to fine adjust to the desired frequency (manual tuning). Storing manually 1 While receiving the station that you want to store, press (BROWSE). The preset list appears. 2 Push the multi-way encoder up/down to select the preset number. 3 Press and hold the multi-way encoder until "MEM" appears. (with the card remote commander) 1 While receiving the station that you want to store, press and hold a number button ((1) to (6)) until "MEM" appears. Note If you try to store another station on the same number button, the previously stored station will be replaced. Receiving the stored stations You can list up the frequency. 1 Select the band, then press (BROWSE). The preset list appears. 2 Push the multi-way encoder up/down until the desired station appears. 11