Sony DSX-S210X Operating Instructions - Page 27
Using rear speakers as subwoofer - Rear Bass Enhancer, Compensating volume level - Dynamic Loudness
View all Sony DSX-S210X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
4 Press (BACK). The display returns to normal reception/play mode. Tip Adjusted DM+ settings can be memorized separately for USB (SensMe™, Pandora USB) sources. Using rear speakers as subwoofer - Rear Bass Enhancer Rear Bass Enhancer enhances the bass sound by applying the low pass filter setting (page 24) to the rear speakers. This function allows the rear speakers to work as a subwoofer if one is not connected. 1 During reception/playback, press the multi-way encoder. 2 Rotate the multi-way encoder until "Rear Bass Enhancer" appears, then press it. 3 Push the multi-way encoder up/down to select from "Level 1," "Level 2" or "Level 3," then press it. 4 Press (BACK). The display returns to normal reception/play mode. Compensating volume level - Dynamic Loudness "Dynamic Loudness" refers to compensating for volume level and signal gain. 1 During reception/playback, press the multi-way encoder. 2 Rotate the multi-way encoder until "Dynamic Loudness" appears, then press it. 3 Push the multi-way encoder up/down to select "on," then press it. 4 Press (BACK). The display returns to normal reception/play mode. Adjusting setup items - MENU 1 Press and hold the multi-way encoder. 2 Rotate the multi-way encoder to select the desired menu item, then press it. 3 Push the multi-way encoder up/down to select the setting, then press it. The setting is complete. 4 Press (BACK). The setting is complete and the display returns to normal reception/play mode. The following items can be set (follow the page reference for details): Setup Clock Adjust (page 6) CT (Clock Time) (page 12) Beep Activates the beep sound: "on," "off." RM (Rotary Commander) Changes the operative direction of the rotary commander controls: "NORM," "REV." Auto Off Shuts off automatically after a desired time when the unit is turned off: "NO," "30sec (seconds)," "30min (minutes)," "60min (minutes)." DEV Inside Alert Activates the Device Inside Alert function: "off," "on." Display Demo (Demonstration) Activates the demonstration: "on," "off." Image Sets various display images. - "All": to display all images. - "Movie": to display a movie. - "SA 1 - 3, All": to display the Spectrum Analyzer. - "Wall.P 1 - 4, All": to display a wallpaper. - "off": to not display any image. Information Displays the items (depending on the source, etc.): "on," "off." Dimmer Changes the display brightness. - "Auto": to dim the display automatically when you turn lights on. (Available only when the illumination control lead is connected.) - "on": to dim the display. - "off": deactivate the dimmer. 27 continue to next page t