Sony DSX-S210X Operating Instructions - Page 13

USB devices For details on the compatibility of your USB device, visit the support site. Support site http://esupport.sony.com http://www.sony.com/mobileAV • MSC (Mass Storage Class) type USB devices compliant with the USB standard can be used. • Corresponding codec is MP3 (.mp3), WMA (.wma), AAC (.m4a) and AAC (.mp4). • Backup of data in a USB device is recommended. Notes • Connect the USB device after starting the engine. Depending on the USB device, malfunction or damage may occur if it is connected before starting the engine. • Do not place a cellular phone or a device with wireless communication functions on the TUNE TRAY, as it may not receive phone signals or communication may be terminated. • Do not leave a USB device in a parked car, as malfunction may result. 3 Connect the USB device to the USB connector. 4 Slide in the TUNE TRAY by pressing PUSH CLOSE on the TUNE TRAY until it locks shut. Playing back a USB device A USB device can be connected to the internal/ external or both USB connectors. To switch between USB devices, press (MODE). Playing back via the USB (internal) connector 1 Press (OPEN). The front panel is flipped down. 2 Press PUSH OPEN on the TUNE TRAY. The TUNE TRAY opens slowly. 5 Close the front panel. 6 Press (SOURCE/OFF) repeatedly until "USB" appears, and then press (MODE) to switch the USB device. "USB Internal" appears, and playback starts. If a USB device is already connected, to start playback, repeat step 6. Press and hold (SOURCE/OFF) for 1 second to stop playback. Removing the USB device 1 Stop the USB device playback. 2 Press (OPEN). 3 Press PUSH OPEN on the TUNE TRAY. 4 Remove the USB device. 5 Slide in the TUNE TRAY, and close the front panel. TUNE TRAY 13