Sony HT-9900M Operating Instructions - Page 27
Connecting to the 5.1ch input jacks, Connecting to a digital jack, the internal Dolby Digital, DTS
View all Sony HT-9900M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Hookups D-1 : Connecting to the 5.1ch input jacks You can enjoy 5.1ch surround sound using the internal Dolby Digital, DTS, or Super Audio CD Multi decoder of this player. (when 6 speakers are connected, set "SURROUND" to "OFF.") You can also enjoy Dolby Surround (Pro Logic) sound, or surround sounds using various "SURROUND" modes (page 69). D-2 : Connecting to a digital jack This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV amplifier (receiver). You are not able to enjoy the surround sound effects of this player. z Hints • For correct speaker placement, refer to the instructions of the connected components. • To enhance the sound performance: - Use high-performance speakers. - Use front, rear, and center speakers of the same size and performance. - Place the subwoofer between the left and right front speakers. • Use connection D-2 when connecting to 7 or more speakers (6.1ch or more). Notes For connection D-2 • After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL" and "DTS" to "DTS" in Quick Setup (page 28). • When you connect an amplifier (receiver) that conforms to the 96kHz sampling frequency, set "48kHz/96kHz PCM" in "AUDIO SETUP" to "96kHz/24bit" (page 91). • Super Audio CD audio signals are not output from the digital jack. 27