Sony HT-9900M Operating Instructions - Page 30
Enjoying the surround sound, effects, to select the size of
View all Sony HT-9900M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
D-2 • DOLBY DIGITAL (only if the amplifier (receiver) has a Dolby Digital decoder) (page 91) 13Press ENTER. "DTS" is selected. AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD AUDIO FILTER: SHARP DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: D-PCM DTS: D-PCM 48kHz/96kHz PCM: D-PCM DTS 14Press X/x to select the type of DTS signal sent to your amplifier (receiver). Choose the item that matches the audio connection you selected on pages 24 to 26 ( B through D ). B-2 C-2 • D-PCM (page 91) D-2 • DTS (only if the amplifier (receiver) has a DTS decoder) (page 91) 15Press ENTER. ◆ When "DIGITAL OUT" is selected in step 11 • Quick Setup is finished and connections are complete. ◆ When "DIGITAL & 5.1CH OUTPUT" is selected in step 11 • The Setup Display for "SPEAKER SETUP" appears. 16Press X/x to select the size of the center speaker. If no center speaker is connected, select "NONE" (page 92). SPEAKER SETUP SIZE: DISTANCE: BALANCE: LEVEL: TEST TONE: OFF FRONT: LARGE CENTER: LARGE REAR: LARGE SUBWOOFER: SMALL NONE To set press then ENTER 30 17Press ENTER. "REAR" is selected. SPEAKER SETUP SIZE: DISTANCE: BALANCE: LEVEL: TEST TONE: OFF FRONT: CENTER: REAR: SUBWOOFER: LARGE LARGE LARGE(REAR) LARGE(REAR) LARGE(SIDE) 18Press X/x to select the size of the rear speakers. If no rear speaker is connected, select "NONE." 19Press ENTER. "SUBWOOFER" is selected. SPEAKER SETUP SIZE: DISTANCE: BALANCE: LEVEL: TEST TONE: OFF FRONT: LARGE CENTER: LARGE REAR: LARGE(REAR) SUBWOOFER: YES YES To set, press , then ENTER . NONE To quit press SDEISTPULPAY 20Press X/x to select whether or not you have connected a subwoofer. 21Press ENTER. Quick Setup is finished. All connections and setup operations are complete. Enjoying the surround sound effects To enjoy the surround sound effects of this player or your amplifier (receiver), set the following items as described below for the audio connection you selected on pages 24 to 26 ( B through D ). Each of these is the default setting and does not need to be adjusted when you first connect the player. See page 85 for using the Setup Display.