Sony HT-9900M Operating Instructions - Page 82
Controlling Your TV or AV Amplifier (Receiver) With the Supplied Remote
View all Sony HT-9900M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
If you make a mistake entering your password Press C before you press ENTER and input the correct number. If you make a mistake Press O RETURN. To turn off the display Press DISPLAY/FILE repeatedly until the display is turned off. Controlling Your TV or AV Amplifier (Receiver) With the Supplied Remote By adjusting the remote signal, you can control your TV with the supplied remote. If you connect the player to an AV amplifier (receiver), you can control the volume with the supplied remote. Notes • Depending on the unit being connected, you may not be able to control your TV using some of the buttons below. • If you enter a new code number, the code number previously entered will be erased. • When you replace the remote's batteries, the code number you have set may be reset to the default setting. Set the appropriate code number again. Controlling TVs with the remote TV/DISC EXPLORER/ DVD switch Number buttons [/1 VOL +/- TV/VIDEO WIDE MODE ENTER 1 Slide the TV/DISC EXPLORER/DVD switch to TV. 2 Hold down [/1, and enter the manufacturer's code for your TV using the number buttons (see "Code numbers of controllable TVs" below). 3 Release [/1. When the TV/DISC EXPLORER/DVD switch is set to TV, the remote performs the following: 82